Still, the fact is these lightweights disc sanders deliver good value. Likable sanders, including Wen 6502T, 6524, and Ridgid eb4424, play role-play and real workhorses in woodworking shops.
Below we will review and compare the strengths, features of the Wen 6502T vs 6524 vs Ridgid eb4424. Also, we introduce our guide in these two models to work at your workshop for years.
1. Wen 6502T Belt Disc Sander
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
The Wen 6502 is made in a metal chassis which is also all about serving your workshop practicing a wide variety of wood pieces. On top of that, it has the relatively large belt sanders in our category three-disc sander, and it can handle all jagged splinters.
The motor is often 4.3 Amps and operates up to 3600 RPM; thus, this sander has all you need for heavy-duty use. Many users have appreciated the stable base made of cast iron that produces minimal vibrations.
Besides, the belt table has the ability to tilt down to 90°, making it easy to accommodate different applications of your workpiece, such as the edges of long pieces of wood.
The sand discs and sand belt are on the machine, the 2-in-1 system contains the versatile disc sander that allows you to work on various requirements on edges.
2. Wen 6524 Oscillating Belt and Spindle Sander
- Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
- Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
- The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
- Onboard storage maintains organization of all accessories and sandpapers
- Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)
It’s a nice sander with four options for sanding drums ranging from 1/2 inch and a full-size belt for the small shop. It’s a nice addition to your woodshop, which is lighter than Wen 6502T 14 pounds. Users work with very hardwood for building guitars.
Unlike the Wen 6502T, Wen 6524 runs with a lower level motor. In fact, Wen 6524 is designed with a maximum operational speed of 1575 FPM. Besides that, the speed of revolution is up to 2000 RPM, which makes finishing so much easier and quicker.
The powerful motor is usually 5 amp and provides a more stable oscillator for the belt 58 times per minute and the inside long stroke which is often put into serving different sanding curves and edges.
This disc sander is also capable of doing many machine features onboard storage and maintains the stability of all accessory features and sandboxes. It includes an aluminum work table, five throat plates, four rubber sanding drums for your operation, and other attachments for adjust-ability and finishing curved workpieces.
3. Ridgid Eb4424 Combination Disc & Belt Sanders
- This item is SANDER, OSCILLATING EDGE 14663
- This product is used for power-detail-sanders
- This product manufacture by Taiwan
- Two machines in one – combines edge belt and spindle sanding in one high performance tool
- Ball bearing construction
The Ridgid EB4424 is a nice option to switch from the edge belt to spindle sanding chores in the home woodworking shop.
The front table is very easy to be in an effective setting of 45 degrees and meets the needs of various edge applications. This versatile disc sander is obviously accurate and makes certain sanding jobs much easier. The firm locking contributes to the solidarity of the table in many operating positions.
Plus, having the belt oscillate in the same fashion as the spindle sander helps to decrease the sanding marks left on a surface, requiring less effortless than non-oscillating edge sanders. This machine is a tremendous innovation for the hobbyist market.
The FPM 1,350 motor gives an impression of the right amount of power to carry through the fundamental edge belt as well as components, plus runs with soft noise when performing its functions. EB4424 has a motor that is in the second position when it comes to comparing it with Wen 6502T and 6524.
With strong construction, these disc sanders minimizing difficulty in operating. Furthermore, it includes a 2 ½”-diameter dust port on the machine’s rear that only a small amount accumulates on the worktable. Provided you are looking for an oscillating edge-belt sander for any curve in your shop, the Ridgid EB4424 is entitled to be the bench-top sander.
Wen 6502T, 6524 and Ridgid Eb4424 Which One’s Best?
In case you are not a professional but start to woodworking, you can go for versatile wen 6502T for most household chores. Otherwise, you may find wen 6524 is a more powerful toolset suitable to well-endowed shop requirements.
Also, Wen 6524 focuses on mobility since it does not relatively weigh heavily, making it easy to handle all needs of your workshop. In case that you are a professional woodworker and want to save some much-needed shop space for other tools, the precision machine Ridgid EB 4424 will be your favorite tool to try basic operations or curves at exactly 90 degrees to the work surface.
In short, there are various options available on the market though, all three models we have suggested are all reliable as you can use them for years with very good results.
The primary factors to consider in an excellent top-notch belt disc sander are disc/belt speed, motor power, and dust collection. After seeing the comparison of the Wen 6502T vs 6524 vs Ridgid eb4424, you can get good value for purchase expense. They are solidly made in metal construction that provides smooth sand for handling your lumber and wood.