Below I will compare the power, portability, and features of the Bostitch N66C and N75C
Difference between Bostitch N66C and N75C
Design Comparison
Bostitch N66c features 11 x 5 x 12 inches in dimension and 4.08 pounds in weight. Meanwhile, its correspondent brother, N75c, measures 17.16 x 14.96 x 6.25 inches and weighs 4.9 pounds.
As you can see, there is a slight difference in weight but a significant contrast in the dimension between Bostitch N66c Vs N75c. In general, N75c is the winner in this battle because it is more compact and lightweight than N66c.
Power Comparison
In terms of a magazine, N66c can be easily set for 1-1/4-inch to 2-1/2- inch nails with 0.080 – 0.092-inch diameter. Meanwhile, N75c is capable of accommodating 11/2-inch to 3-inch wire weld and plastic inserted coil nails with shank diameters of 0.090 – 0.131 inches.
Moreover, N66c and N75c hold the same magazine capacity of 300 nails with an operating pressure of 70 – 120 PSI but different driving power. Specifically, N66c provides 515 inches/pounds of generating energy for maximum performance. On the contrary, N75c’s driving force can produce up to 630 inches/pounds, which is much more powerful than the previous models.
Both of them own flexible nail depth adjustment and a soft rubber foot so that you can work with a variety of siding materials, including softwoods. Besides, they work with any air compressor and have a tool-free adjustable exhaust that enables users to lead exhaust fumes in any route they want.
Although Bostitch N66c and N75c are different in construction materials (magnesium and aluminum, respectively), they are tough enough to accommodate excellent durability.
In conclusion, in the engine power round, Bostitch N75c is more outstanding in the driving power aspect.
Features Comparison
Although there are many similarities in specs, Bostitch N66c and N75c have specific features that make them distinctive.
N66c overcomes other sliding nailers due to its compactness and lightweight with the weight under 5 pounds. Also, N66C-1 Siding Nailer is made of aluminum material, which means it is light enough for all-day use.
The highlight of N75c is coil nails length, which is ideal for high-volume nailing of wall and house sheathing. Besides, N75c material construction is aluminum, which creates a lightweight design for added durability.
Quick Rundown Of Bostitch N66C
- The sliding nail gun drives wire weld and plastic inserted coil nails
- Adjustable depth guide of the siding nailer sets nails to desired depths quickly and conveniently
- The coil siding nailer has a lightweight aluminum design for durability
- Soft rubber foot helps to prevent damage to softer woods
- Tool-free adjustable exhaust conveniently directs exhaust away from the user
Good performance
Plenty of power
Durable die-cast aluminum used in the system
Easy-to-use depth adjustment
Effective rear exhaust[/i2pros][i2cons]No switch for changing the trigger
[/i2cons][/i2pc]
Quick Rundown Of Bostitch N75C
- The sliding nail gun is perfect for high-volume nailing of wall and roof sheathing
- The siding nailer drives 15 degree wire weld collated and plastic inserted nails with shank diameters of .090-inch - .131-inch
- The coil siding nailer has a lightweight aluminum design for durability
- Adjustable depth guide sets nails to desired depths quickly and conveniently
Perfect wall and roof sheathing nailing
Adjustable depth guide
Quite consistent performance [/i2pros][i2cons]Constant mins feeding of the nails
Need a little adjustment[/i2cons][/i2pc]
Conclusion
Have you found out the coil siding nailer that is suitable for your work after reading the Bostitch N66c Vs N75c comparison article? In fact, it is quite tough to decide which one wins in the comparison because the final verdict is up to you.
If you like a compact and lightweight sliding nailer, let’s pick N66c. Otherwise, for those who work with more massive jobs like nailing the roof, the better choice is N75c.